Installing a Concrete Pad for Your Fórsa Bike Shelter: A Step-by-Step Guide

Installing a Concrete Pad for Your Fórsa Bike Shelter: A Step-by-Step Guide

Installing a Fórsa Bike Shelter begins with a solid foundation, and a concrete pad provides just that. This guide will lead you through the process, ensuring your shelter has the support it needs.

Step 1: Site Selection

Choose a location for your Fórsa Bike Shelter that is both convenient for users and provides enough space for the shelter and access. Bear in mind any local building codes or regulations, and ensure the site is clear of any underground utilities.

Step 2: Marking the Area

Once you've chosen your site, mark the area where the concrete pad will be laid. This area should match the dimensions of your Fórsa Bike Shelter with some extra space around the edges for easy access and maintenance.

Step 3: Preparing the Site

Remove the top layer of grass or soil from the marked area. Dig down to a depth of about 15 cm to create room for the concrete pad.

Step 4: Building a Form

Create a wooden form to contain the concrete. This should match the size of the marked area. Secure the form in place using wooden stakes.

Step 5: Laying a Sub-Base

To ensure stability, a sub-base of compacted hardcore or gravel (approximately 5 cm deep) should be laid. This will help with drainage and give the concrete pad a solid base.

Step 6: Mixing and Pouring the Concrete

Mix your concrete according to the manufacturer's instructions. Pour the concrete into the form, ensuring it's spread evenly. Use a trowel to smooth the surface of the concrete.

Step 7: Curing the Concrete

Allow the concrete to cure. This usually takes a few days but can vary depending on the weather and the specific type of concrete used. Do not proceed with the installation of the shelter until the concrete is fully cured.

Step 8: Installing the Fórsa Bike Shelter

Once the concrete pad is ready, you can proceed with the installation of your Fórsa Bike Shelter according to the accompanying instructions. Ensure that the shelter is securely bolted to the concrete pad for maximum stability and safety.


In conclusion, while installing a concrete pad for your Fórsa Bike Shelter requires some time and effort, it's a crucial step that ensures the stability and longevity of the shelter. Remember to take your time, follow all the steps carefully, and you'll have a solid foundation ready for your new Fórsa Bike Shelter.

Back to blog